Tools Needed:
Needle Nose Pliers # 4454
Wire Cutters # 4457
Round Nose Pliers # 4458
Instructions:
1. Cut (2) 5 7/8”, (2) 6”, (2) 6 1/8” and (2) 6 1/4” lengths of silver small chain.
2. Gather one of each chain in order of length with a 6mm jump ring. Repeat for the second set of chains. Attach a lobster claw clasp to one of the jump rings.
3. Attach a 6mm jump ring to one end of each chain.
4. Cut (4) 8 link lengths of medium chain. Use 6mm jump rings to connect each link to the next link, attaching the four chains together.
5. Cut (4) 12 link lengths of medium chain. Use 6mm jump rings to connect each link to the next link, attaching the four chains together.
6. Using jump rings, connect the last links in the grouping of 8 link chains to one of the 12 link lengths of chain. See the necklace detail.
7. Using the 6mm jump rings attached to the end of the small chains, connect a set of chains to the 8 link chain section. Connect the other set of chains to the 12 link chain section.
8. Make 29 bicone and 32 round crystal drops.
9. Alternate between the round and bicone drops along the first row of the 8 link and 12 link chains.
10. Attach bicone drops only to the jump rings connecting the first and second row of the chains.
11. Attach silver/crystal drops to the jump rings connecting the second and third row of the chains.
12. Attach round drops to the jump rings connecting the third and fourth row of the chains.
13. Use jump rings to connect silver/crystal drops to the fourth row of chains.