Techniques to Know:
Opening Jump Rings
Form a Loop
Necklace:
1. Cut a 5” and a 7 1/4” length of medium chain.
2. Make the following beaded links: (1) large flat gemstone link, (2) large acrylic links and (4)
mirror bead, faceted gemstone and mirror bead links.
3. Connect the large flat gemstone link to the center of the two chains. Next connect an
acrylic link to one side of the gemstone on the 5” chain. Connect the other end of the link
to the 7 1/4” chain, leaving a wider gap between where the links are attached.
4. Repeat this for the remaining beaded links. After connecting the end links there should be
approximately 2 remaining at both ends of each chain.
5. Make 50 seed bead/E-bead mixed links each measuring 1 1/4”. Link 25 beaded links into a
chain using 4mm jump rings. Repeat for the second set of 25 links.
6. Using 4mm jump rings, attach one end of each beaded link chain to the 5” and 7 1/4”
chains.
7. Cut (4) 1 1/4” lengths of chain.
8. Using 4mm jump rings, attach a chain to each of the loops of the last two beaded links.
9. Use a 4mm jump ring to gather two chains together and attach a toggle clasp end.
Repeat for the second set of chains and toggle end.