Iron On Designs

Peel design from backing paper
Lay design glue side down onto project
Set iron to cotton setting. Cover with cotton cloth and press straight down for 30-60 seconds
Carefully peel off transfer paper. Do this slowly to be sure all stones have adhered completely. Recover and apply more heat if necessary.

Peel transfer paper from backing.
Lay transfer paper sticky side up on top of your pattern.
Arrange stones glue side up on top of your pattern.
- NOTE: Your pattern will be reversed when applied to the project.
Turn Transfer paper, with stones affixed, glue side down onto the fabric.
Set iron to cotton setting. Cover with cotton cloth and press straight down for 30-60 seconds. If the pattern is large, lift the iron straight up then press down in a new area.
Carefully peel off transfer paper. Do this slowly to be sure all stones have adhered completely. Recover and apply more heat if necessary.